Search the whole station

Polyester vs Cotton, Nylon & Viscose: Key Differences

Blog 1690

As we all know, polyester (polyester fiber) is extracted from petroleum. It is naturally afraid of water (hydrophobic), moisture absorption rate is zero, extremely resistant to pulling, but also comes with permanent anti-wrinkle passive skills. Compared with natural pure cotton, which can absorb water, polyester is more hot to wear on the body, but it dries quickly. What about nylon ? Polyester is more sun-resistant and better in color fixation, but in terms of the most primitive elasticity, it can only admit defeat. Besides, viscose (rayon/rayon), this stuff has an invincible drape feeling and is breathable and comfortable, but its strength can drop by 30% when touching water-polyester has no such fatal injury at all. As for acrylic, it was born to mimic the warmth of wool, so the yarn is much more fluffy and fat than flat polyester.

Selecting the wrong fabric not only destroys the function of the clothes, but also takes the budget to waste. Below, I have compiled a 1 pile of hard core data, laboratory wear test results, and a set of exclusive material selection models that I usually use to help brands avoid “marketing gimmicks.

T.E.A.M. Fabric Selection Matrix

Don’t just look at the washing label, you have to understand the physical logic behind the yarn when choosing the fabric. I have summarized this “T.E.A.M. Matrix”, which is specifically designed to force buyers to distinguish between primary and secondary in specific usage scenarios:

  • T (Thermal-thermal conductivity): This cloth is the heat dead cover on the body (such as acrylic, polyester), or can let the heat out (cotton, viscose)?
  • E (Endurance-resistance to operation): put it on the Martindale wear tester, how many times can it carry friction to break? (ranking: nylon> polyester> cotton> viscose).
  • A (Aesthetic-color value and sagging feeling): does it sag naturally along gravity (viscose), or can it be shaped with its own skeleton (polyester)?
  • M (Maintenance-good service): take hot water and strong laundry detergent fierce wash, it will not shrink? (polyester casually wash; viscose washed directly shrink into children’s clothing).

Insert a T.E.A.M. matrix radar chart here to compare the scores of these five fabrics in four dimensions.

Cotton VS polyester: what is the difference?

In a word: cotton absorbs water, polyester repels water. The chemical difference in this bottom layer determines the performance comparison of all the two.

The common moisture regain of cotton is about 8.5 percent, meaning it will suck your sweat away and then lock it firmly in the “core” of the fiber. The moisture regain of polyester is only a pitiful 0.4 percent, and sweat can’t get in at all and can only be awkwardly pasted on the surface of the fabric.

Therefore, pure cotton clothes will become heavy 1 they sweat and dry for several hours. After exercise, cold wind blows 1 and thieves are easy to catch a cold. However, ordinary polyester is stuffy and sticky when attached to the skin after sweating-unless it has done a post-finishing process of moisture absorption and perspiration (such as Nike’s Dri-FIT technology), which quickly spreads water to a large surface by capillary action, thus accelerating evaporation.

On the durability, polyester is absolutely hanging pure cotton. Cotton fibers cannot withstand repeated rubbing and UV exposure. 1 is an ordinary 100 percent cotton T-shirt, and after 30 times of crazy washing, the fibers begin to break slightly. But the 1 100 percent polyester sweatshirt is still strong after being rolled in the washing machine hundreds of times.

Property / MetricCottonPolyester
Moisture Regain (%)Around 8.5%; highly absorbent, pulls sweat into the fiber core and retains moistureAround 0.4%; hydrophobic fiber that repels water and absorbs very little moisture
Sweat ManagementAbsorbs sweat effectively but holds moisture for a long time, making fabric heavier and slower to dryNaturally dries quickly; sweat stays on the surface unless enhanced with moisture-wicking finishes
Drying SpeedSlow; saturated fibers require more time to release trapped moistureFast; low water absorption allows rapid evaporation
Skin Comfort After ExerciseFeels cooler initially but becomes heavy and damp when wetCan feel sticky against skin if untreated; engineered polyester fabrics improve moisture transfer
Shrinkage Rate After WashingHigher shrinkage risk due to natural fiber swelling and relaxationVery low shrinkage; thermoplastic structure maintains shape and size
Tensile StrengthModerate; fibers weaken with repeated washing, friction, and UV exposureHigh; strong polymer chains provide excellent durability and resistance to repeated stress
Abrasion ResistanceModerate; fibers gradually break down under heavy rubbingExcellent; withstands repeated friction and industrial washing cycles
Wash DurabilityFabric strength decreases gradually after many wash cyclesMaintains strength and appearance after hundreds of wash cycles
UV ResistanceLower; prolonged sunlight exposure weakens cotton fibersHigher; synthetic polymer structure provides better resistance to UV degradation
Shape RetentionMore prone to wrinkles and deformationExcellent wrinkle resistance and dimensional stability
Typical ApplicationsT-shirts, bedding, towels, casual clothing requiring softness and breathabilitySportswear, jackets, outdoor apparel, uniforms, high-durability textiles

Nylon VS polyester: synthetic males who love and kill each other

Nylon feels significantly softer and more elastic than polyester; but polyester eats deeper and is not afraid of ultraviolet rays. Although the two brothers are both petrochemical thermoplastics, their molecular chains grow differently. Nylon (polyamide) 1 was invented to replace silk at the beginning. It was bent casually and had a smooth cool feeling on the upper body.

In contrast, polyester fibers are much more “axial” (harder). But this stiffness just makes it naturally wrinkle-resistant. You crumple the 1 polyester shirt into a ball and stuff it into the trunk, take it out, shake it 1, and it’s flat. But nylon still has some creases.

In the lab tests I did, the friction limit of nylon was indeed higher. Put a 400D (denier) nylon backpack and a same 400D polyester backpack on the concrete floor and drag them to death. It must be polyester that broke first. But! If you leave these two bags in the hot sun for half a year, nylon will fade and become brittle, while polyester is not only the same color, but also tear-resistant.

Viscose VS Polyester: A world of difference in the difficulty of care

Viscose is either sent to dry cleaning or washed by hand as very gently as ancestors. However, polyester is fine if you throw it into the washing machine. Viscose (also known as Rayon/rayon/rayon) is regenerated cellulose extracted from wood pulp and is considered a semi-synthetic fiber. It is as breathable as pure cotton, and has an excellent drape feeling. The water waves ripples when walking, and the texture is very similar to expensive silk.

But viscose has a fatal hole: the wet strength is too poor. 1 it hits water, the molecular bonds in the viscose fiber swell and weaken. As long as it is washed with water, its tensile strength plummets by 30%. At this time, if the washing machine is violently dehydrated and 1 stirred, the clothes will be permanently pulled and deformed immediately.

In contrast to polyester, the fiber core does not absorb any water, and its strength is exactly the same whether it is dry or wet. So the conclusion is very simple: if it is to make the kind of summer fairy skirt that flutters in the wind for the brand, use viscose; If you are a restaurant waiter who sweats hard every day and changes clothes every day, choose polyester honestly.

Acrylic vs polyester: who is the king of pilling?

Acrylic is born as a wool flat, the main focus of the heat lock; and polyester is a pursuit of strength and stability of the all-around king. When spinning acrylic yarn, the manufacturer will deliberately create the fluffy curl structure to lock the still air inside. This makes the acrylic sweater light and warm.

However, the abrasion resistance of acrylic fiber is compared with that of polyester fiber, which is simply too rotten to look. This has also triggered the most feared nightmare in the garment processing industry: crazy pilling.

Old Bird’s Guide to Avoid Pits: Never, Never Buy [Acrylic Polyester] Blended Sweaters! Usually arm and torso 1 friction, fragile acrylic fiber will break; however, super hard core of polyester fiber constantly. As a result, the broken acrylic fibers will die wrapped around the unbroken polyester, forming a hard, never washed away dead fur balls (Pills).

Polyester with whom the most like?

From the performance point of view, with its most like brother is three acetic acid (Triacetate) and nylon.

  • Like triacetic acid: both of them are afraid of water, do not shrink, and can be “heat set”. The factory pleats the student uniform skirt, that is, it heat sets polyester by high temperature, and the pleats are washed as many times as possible.
  • Like nylon: synthetic filaments extruded from the machine, anti-pulling ability against the weather. The sportswear, luggage and jackets markets are largely divided between them.

The Blended-Fabric Trap: Stop Falling for the “Eco-Friendly” Hype

These days, apparel brands are particularly fond of touting “eco-friendly poly-cotton blends” in their marketing. To be honest, this is just a supply-chain illusion.

With 60% cotton and 40% polyester, it’s indeed comfortable and durable to wear, but from an ecological‑circular‑economy perspective, this is a dead end. With current commercial recycling technologies, it is simply not possible to separate natural cellulose (cotton) from plastic polymers (polyester) in a cost‑effective manner. A 100% polyester garment can be melted down and re-spun into rPET; a 100% cotton garment can be shredded and re-spun into yarn. But a 60/40 blended garment will ultimately end up directly in a landfill. If you’re a buyer who’s truly committed to sustainability, sticking with mono-materials is the way to go.

People Also Ask (FAQ)

Polyester washing will shrink?
Absolutely not. Polyester is a thermoplastic material that has been molded at temperatures above 176°C(350 °F) before leaving the factory. The temperature of your standard washing machine and dryer cannot change its molecular structure at all. What kind of water does it shrink?

What is best to wear on a hot day: cotton, viscose or polyester?
Daily leisure stroll, viscose is the coolest, because it absorbs moisture well, has a strong sense of drape, and can circulate when the wind blows 1. However, if you want to do high-intensity exercise on a hot day, the ultra-thin woven polyester that has been treated with mechanical and physical perspiration is the king, absorbing and drying in seconds.

Compared with polyester, is viscose poisonous?
The finished viscose cloth worn on your body is absolutely safe and non-toxic. The “poison” that everyone is worried about is the manufacturing process before the factory. Turning raw wood pulp into viscose requires the use of carbon disulfide, a highly toxic chemical. If the factory does not have a closed-loop chemical recovery system, it is extremely easy to harm workers and pollute local water sources.

Why is nylon more expensive than polyester?
The synthesis cost of the chemical precursor raw material of nylon (caprolactam or adipic acid) is much more expensive than the purified terephthalic acid used in polyester. Moreover, nylon consumes more energy when extruding and drawing, so it is destined to be a high-end synthetic material.

Can polyester or acrylic clothes be ironed?
The electric iron must be turned on to the lowest temperature, preferably with a hot cloth in the middle. Don’t forget that both are essentially plastic! If the hot iron is directly turned on, the surface fibers will melt instantly, and a permanent bright mark (called “aurora” in jargon) will appear on the clothes.

The prev: The next:
Expand more!