Search the whole station

Guide To Picking Gray Striped Curtains To Avoid Pits

News Article 630

A lot of gray striped fabric looks good and refreshing when it is spread out on the table, but it is quite another thing to hang up the window. Why? Because the curtains will have folds, these folds are likely to “eat” part of the stripes you originally fancy; if the two curtains are put together, the seams may directly cut off the originally coherent lines. Therefore, when choosing cloth, don’t just stare at the color. You have to think clearly in advance: how wide the cloth is, pleated and hung in front of the window, what it will look like.

Grey and off-white striped curtain panels beside a window

When choosing a model, it is a routine operation to take a look at a small sample, but you must not lay it flat on the table even if it is finished. Be sure to take the sample to the real window of your home and make some gestures. Facing the light during the day, see if there is much contrast between gray and background colors under the backlight. At night, turn on the indoor lights to see the effect. You know, the color, texture and light transmittance of the fabric will “change face” at any time with the background and light source. Through the mobile phone screen to see the net map? That absolutely can not replace you in the scene to see with their own eyes to judge.

Let’s First Take a Look at What Stripes Look Like When They’re Pleated

Whether the stripes are horizontal or vertical, and their spacing, directly determine the visual rhythm of the finished curtain. After you get the sample, you can fold it according to the hanging method you plan to do, try to simulate the appearance of the finished product, and then take a step back and look at it from the front: can the gray stripes still be connected? Do some parts fall directly into the folds and become invisible? Can you accept this picture when it is opened and closed? Especially when you want to use two curtains side by side, it is strongly recommended that you put two small samples together to see the effect of the seam, and don’t stare at a piece of cloth.

In addition, don’t think that the performance of the fabric will be finalized if the stripe pattern is selected. The surface looks the same gray stripes, and the material, textile technology, gram weight, even back glue and lining cloth may vary greatly. Do you really want a soft light-transmitting sense of immortal, privacy at night, or a close-fitting shading effect? This depends on the real fabric and finished product process to ensure. Remember, even if you choose dark gray, it doesn’t mean you won’t leak light after you install it.

The Door Width and the Seams Determine Whether the Lines Can Be Aligned

Before doing it, measure the actual span of the track or Roman pole, calculate the width and height of the finished product, and then confirm the pleating ratio and the “effective door width” of the fabric with the curtain maker “. The fabric width listed by the retailer may not be the same as the usable finished width you’ll actually get. If the window is too large and a piece of cloth is not enough, it is much more important to see where the stitching gap falls and whether the stripes can match or not than whether you look at a small sample alone.

When going to the store to communicate, remember to make clear the stripe direction, pattern circulation rule, how to cut and where to leave the seams. Do vertical stripes have to be absolutely vertical? Do patterns allow misaligned stitching? Which side has to leave a margin for stitching? These details must be finalized before the scissors are formally placed. You know, when the curtain is fully opened, half opened and fully closed, the seam is completely different. If conditions permit, it’s best to take a look at the large swatch samples produced using the same hanging method.

Color Verification and Care Instructions – Final Quality Check

“Gray” has never been a rigid or static visual outcome. Take the sample you picked to the wall, in front of the glass, or put it together with your interior furnishings to see if the overall color is the feeling you want. Next, observe the contrast between the stripes and the background color in backlit conditions. If you plan to add a layer of lining cloth, be sure to stack the fabric and lining cloth together for a try, because if the number of layers of cloth is more, the transmittance, weight, drape effect and pleating shape will change greatly.

Don’t forget to 1 a copy of the fabric or finished product care instructions before you finally decide to pay for it. Remember to check with the merchant the batch of colors, the front and back of the cloth, the width of the door that can really be used, and what other processing restrictions. If the curtains need to be spliced, the processing party must write clearly the direction of the stripes, the requirements for the flowers and the position of the seams in black and white on the order, confirm these, and then calculate the final material size.

The prev: The next:
Expand more!