Search the whole station

Digital Printing On Polyester Fabric: What To Check

News Article 220

After getting an renderings, many people will first ask if the printer can make the pattern, but ignore whether the cloth in their hands is suitable for this set of processing. Even if the ingredient labels all say polyester, different yarns, fabric structures, grammages, door width and finishing conditions may bring completely different printing performance.

Digital printing process on polyester fabric

When preparing for the digital printing on polyester fabric project, what is really worth solving is not whether it can be printed, but which base fabric to use, what coloring route to use, and how to convert the sample results into acceptable bulk standards.

First, Clearly Describe the Base Fabric Condition

Polyester fabric is just the starting point. The fiber ratio, yarn to fabric structure, gram weight, nominal width and effective width shall be recorded before sample delivery, and whether there is coating, backing, heat setting or other finishing shall be indicated. Thin, loose tissue and thick flat cloth surface, the bleeding, through printing, edge shrinkage and pattern clarity of the reaction is not the same.

Surface flatness, ground color and transparency will also change the appearance of the pattern. The color on a white or light-colored base fabric may look different under reflected and transmitted light; the fabric with a background color will also overlap with the printed color. Only look at the name of the ingredients, can not judge the final color, feel or light transmission effect.

Stamp Route to Be Determined with End Use

Common dyeing and printing routes for polyesters include dispersion dyeing, thermal transfer printing, sublimation printing, paint or pigment printing, and composite processing. They are not arbitrarily interchangeable names. The selection should also consider fiber and tissue, color, pattern coverage, batch size, equipment conditions, fixing or drying requirements, and care and performance goals to be achieved after printing.

The digital pattern is only the design input, which does not mean that the actual printing process has been determined. The print file is the same, the base fabric, coloring system, adhesive or finishing, color, thickness, stiffness and cleaning performance may change. Process validation should fall on a representative swatch, not in a computer file.

Screen Color Does Not Replace Approval Sample

The color on the display is suitable for communication direction, but it cannot be directly used as the acceptance standard of the cloth surface. It is safer to make a printing sample or strike-off first, establish a number for the sample, and record the base fabric, pattern version, color, processing status and batch.

Don‘t just tile the table when looking at the sample. The front and back should be observed at the same time, and the color and pattern continuity should be compared under reflected light and transmitted light; when used in window decoration, folds, folds, layers and actual background should be simulated. Thin-through fabrics are particularly susceptible to backlighting and background color, and it is difficult for a mobile phone photo to cover these changes.

Small Sample Check Should Exceed Color Like or Not

Getting the color close is just the first step. It should also check the flower position and direction, edge state, color bleeding or print-through, whether the surface is locally hard, and whether there is any obvious change in hand and sag after treatment. When light and thin fabrics are involved, edge shrinkage, cloth surface deformation and local light resistance differences are also worthy of separate observation.

When the durability conclusion is required, the light resistance, washing resistance, wet friction, dry friction and cleaning compatibility shall be checked separately, and the method and conditions adopted shall be recorded. The size, feel and appearance of the printed samples should be rechecked, and the nursing conclusion of the unprinted base fabric cannot be directly followed. If the project involves flame retardant, shading or other properties, it is not possible to deduce that all indicators remain unchanged with a printed sample.

From Approved Sample to Mass Production

The approved sample shall be fixed in a traceable state, including pattern version, color, base fabric specification, processing route, sample number and observation conditions. As long as the color, pattern, door width, coating, backing or process changes, it is necessary to judge whether it is necessary to resample and review.

The acceptance of bulk goods can focus on color and batch, flower position and direction, effective door width, edge, roll and packaging identification. Even if different batches use the same pattern file, it should not default that the appearance is exactly the same. Keeping approval samples and production records is more useful than just saving a screen renderings.

Finally Returning to the Finished Product Inspection State

After the curtain fabric is cut, stitched, sewn and hung, the pattern will enter new viewing conditions. Wrinkles may compress patterns, splices may expose directional or cyclic deviations, and backlighting may amplify color and print-through differences. Therefore, it is best to review the flower position, drape, light transmission, joints and appearance after cleaning in representative finished products or sample windows before batch release.

The real judgment that can be delivered is not that the pattern has been printed, but that there is a veritable consistency between the approved sample, the bulk and the final use state.

The prev: The next:
Expand more!